 |
Boston Audio Design
Boston Audio Design manufactures audiophile accessories that help you get the most from the equipment you already own.
Our award-winning TuneBlocks bring the many energy absorption benefits of pure carbon to a wide variety of applications - including CD / DVD players, preamps, power conditioners, turntables, amplifiers and speakers.
The Mat 1 and Mat 2 are pure carbon record mats praised by audiophiles worldwide. Whether you own a Linn, VPI, Rega, Acoustic Signature, Clearaudio, Nottingham or almost any other turntable, our record mats are one of the most cost-effective upgrades you can make to your system. |

Click here for more information about the Feickert Protractor |
Feickert Protractor
Dear customer, first of all let us thank you for your confidence in our products. The Protractor you hold in your hands is a precision device that enables you to adjust cartridges and tonearms with an effective length from 8,6 up to 17,7 inches for correct overhang and offest.
The calculation of parameters were carefully carried out according Lofgren’s (frontside) and Baerwald’s (backside) equations aiming in reduction of the overall RMS distortion level caused by deviations from the perfect linear tracking position of your cartridge. Please read this manual carefully to have full benefit from this unique tool. In terms of perfect azimuth calibration we reffer to our innovative software ADJUST+ (www.adjust-plus.com).
A little bit of theory
The general geometrical correlation of a tracking device based on a fixed pivot point are well known since the fundamental publications of Baerwald and Lofgren back in the first half of the 20th century. The conclusion of both papers was that such a tracking device must have an angular offset with a defined overhang. The offset and the overhang vary with the effective length of the tonearm itself.
While tracking the record the stylus matches tangential position in the groove in two points – the inner and outer Null points (linear tracking position). |
 |
HIFI Tuning Fuses
When I was a poor audiophile, I loved tiny tweaks. Without switching out components, I could improve my system's sound without spending too much money. Bypassing or replacing cheap capacitors, cleaning connections, applying Star typewriter-cleaning gum to vibrating headshells, and other tiny tweaks made memorable sonic improvements.
I recently replaced the cheap fuses in my Musical Fidelity kWP preamplifier with fuses made by HiFi Tuning in Germany, sent to me by The Cable Company. These have silver filaments, ceramic bodies, and gold-over-silver terminations, and damn if they didn't seem to produce a subtle but noticeable improvement in smoothness and coherence. For less than $30 each (available in various sizes they're worth trying, if only for the diversionary entertainment.—Michael Fremer |
 |
LIMITED EDITION ITEM - Furutech DeMag
The Furutech DeMag completely demagnetizes LPs and optical disc media such as CD, CD-R, DVD, MD, Game CD, Photo CD, SACD, and DVD Audio. Plus it’s an indispensable accessory for keeping interconnect cables, connectors and power cords demagnetized to prevent magnetic signal distortion. |

|
Furutech DeStat
Destat Removes Static and Dust for a quiet background. It significantly lowers the noise floor greatly resulting in a musical & refined presentation. |
| Corby Tweaks
presents Premium Cable Risers
for the Discerning Audiophile

|
|
|
Black Diamond
Racing
The Pyramid Cones & The Shelf
What is Black
Diamond Racing?
BDR was founded to explore the application of advanced composite
materials, such as carbon fiber, to alternative structures.
Available at
My Kind of Music; for more information visit the manufacturer's
site: http://www.tricell-ent.com/BDR.htm
|
|
|
Harmonic Resolution
Systems
is dedicated
to producing high performance products that will allow you to
fully enjoy the experience of accurately reproduced music and
video.
Their products
significantly reduce structural-borne and air-borne vibration
over the entire frequency range of any audio/video system.
Many years of engineering experience, custom material development,
and listening tests have resulted in a product line that enables
your audio/video source and amplification components to achieve
peak performance.
Individually, HRS products produce significant improvements in
signal quality as if you had made a significant upgrade to your
component. Used as a system, the changes will redefine what you
thought was possible.
Available
at My Kind of Music; for more information visit the manufacturer's
site: http://www.hrsaudio.com/Index.html
|
|
|
SYMPOSIUM ACOUSTICS
PRODUCTS
Platforms,
Rollerblocks, Point Pods and Couplers, Equipment shelves.
Available
at My Kind of Music; for more information visit the manufacturer's
site: http://www.symposiumusa.com/products.shtml
|
|
|
Sound Anchor
This is where
you will find the finest stands available for all your home audio
and video requirements .
Sound Anchor Stands are specially designed with performance in mind.
All of your speakers and components will sound better when they
are placed on Sound Anchor Stands
Available at
My Kind of Music; for more information visit the manufacturer's
site: http://www.soundanchors.com
|
|

|
Cardas
Accessories
from this well known cable & accessory manufacturer.
Available at
My Kind of Music; for more information visit the manufacturer's
site: http://www.cardas.com/products/index.html
|
|
|
AudioPrism
AudioPrism has
set new standards for performance, value and design. With an innovative
series of indispensable accessories and a wide ranging line-up of
exceptional power products, AudioPrism continues to provide products
that don't just perform, they out perform....
Available at
My Kind of Music; for more information visit the manufacturer's
site: http://www.audioprism.com/
|
Valves
|
|
|
|
Ei - Electronic
Industries - Serbia / Yugoslavia.
Using original
Philips machinery, drawings and test procedures. Marketed outside
of Serbia by Edicron Electronic Components Ltd, UK. Visit this manufacturer's
site at:
Svetlana Tubes
- St. Petersburg Russia
Manufactured
to Russian military standards and manufactured to exacting quality
control.
Call to inquire
about NOS arrivals.
Pearl Tube
Coolers & Cryogenics
|
Power and Line Conditioning
|
|
 |
foundation
research - LC Power Filter Cords
Noise
seriously limits an audio system's ability to present clear,
clean musical flow. Basic audio system philosophy begins with
the removal of noise. Many systems have yet to reach their full
potential, given the extreme output of noise that is injected
into otherwise fine equipment. The musical benefits are more
than obvious when LC1 and LC2 line filters are used to remove
power line noise. Noise is not only injected into the system by the power line,
but by audio components themselves. The LC1 and LC2 are unlike
other line conditioners, since they address bi-directional noise
problems by providing AC isolation between components. The benefit
of bi-directional power line filtration is a proven asset to any
high-end audio system. The LC1 filter was designed to accomodate front end components
like CD players, preamplifiers and home theatre processors. The
LC1 can also provide substantial benefits when used with electrostatic
loadspeakers
The LC2 is intended for use with poweramplifiers of all types, but
is very effective on home theatre projectors as well, thus proving
that the affect of power line noise removal can be seen as well as
heard.
|
 |
foundation
research - NL1 Noise Load
The foundation research NL1 noise load is an RFI filter designed
to be used at amplifier binding posts and speaker terminals. |
 |
Black Ravioli
The Black Ravioli system can help you to redefine the performance of your system to levels you would not have though possible and do it in a structured, cost effective way. The products function and simple form allows it to be used across a wide range of equipment and system applications.
The following goals were set for the product and are inherent in all of its iterations ;
The product must be capable of providing energy conversion that is effective across the discernable audio and visual spectrums and so far as reasonably practicable, their extremes.
The product must be capable of dissipating at the equipment interface the vibration energy that is inherent within the system components and the surrounding environment.
In performing it's function the product must not add or take away anything from the event as prescribed by the design and operation of the system componants.
The product must be functional and able to be applied to the majority of audio and visual componants.
The pads and spacers together are a credible and good value vibration control solution that can be tailored and upgraded to meet individual requirements. Its function before form in this combination.
The risers provide further improvements in performance and present the pads in a much more acceptable and polished form. In all of its iterations Black Ravioli performs best when applied as a complete system solution but it can be extremely effective when applied to individual pieces of equipment.
Overall the range allows a variety of cost v performance options for the user. |
 |
ZEROSTAT - Clean Your
Vinyl Records
The Zerostat
Antistatic Gun is an antistatic "generator" which has
numerous applications in any microscopy laboratory. Just squeeze the
"trigger" of the Zerostat and a
steady stream of ions is released. The "magic" comes from
two powerful piezoelectric crystals and a patented compression trigger.
Originally developed for removing dust from "vinyl" or before
that, normal "phonograph records." |